Breville BEM800 Troubleshooting Guide download pdf (Page 19)

19

CLEANING AFTER USE

1. Always ensure the speed control dial

is in the ‘Off’ position, the mixer is

switched off at the power outlet and

the power cord is unplugged.

2. Remove the beater, dough hook or

whisk attachment and mixing bowl

from the mixer. Follow instructions in

the ‘Assembly and operation’ section

of this booklet

3. Wipe the mixer motor head and

mixer stand with a soft, damp cloth

then dry thoroughly.

Wipe any excess food particles from the

power cord. Wash the bowl, beater, dough

hook, and whisk in warm soapy water with

a soft cloth or they can be washed in the

dishwasher. Rinse and dry thoroughly.

NOTE: Do not use abrasive scouring

pads or cleaners when cleaning the

mixing bowl, ﬂat beater, dough hook or

whisk as these may scratch the surface.

Also ensure that the attachments are

not soaked in water for extended periods

of time, for example several hours or

overnight, as this may damage the ﬁnish.

NOTE: Do not wash or immerse the

mixer motor head and mixer base in

water or any other liquid. Clean with a

soft, damp cloth and dry thoroughly. Do

not allow water or any liquid to enter the

gear system as damage may result.

SCRAPER BEATER

1. Wash the scraper beater in warm,

soapy water using a soft cloth or

a soft bristled brush. Rinse and

dry thoroughly.

2. The Scraper Beater can also be

washed in the dishwasher (top

shelf only).

3. A small bottle brush can be used to

clean inside the neck of the Scraper

Beater if needed.

STORAGE

Your Breville Wizz

®

Planetary Mixer

should be kept in a convenient position

on your kitchen bench top or in an

accessible cupboard.

Always ensure the speed control dial is

in the ‘Off’ position, the mixer is switched

off at the power point and the power cord

is unplugged.

Store the mixing bowl in the bowl locking

recess in the mixer Base.

Place the attachments inside the mixing

bowl and lower the mixer motor head into

the horizontal (closed) position.

The motor head cannot be taken off the

base for any purpose.

CARE, CLEANING AND STORAGE

BEM800_IB_Issue_0110.indd 19 10/12/09 10:00 AM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Comments to this Manuals

No comments