Breville DIE CAST PROGRAMMABLE BES820XL User Manual download pdf (Page 27)

TROUBLE SHOOTING GUIDE

PROBLEM POSSIBLE CAUSES WHAT TO DO

When the machine is switched

on, the steam and hot water lights

are ﬂashing.

Selector Control is not in ‘Standby’

position

Turn the Selector Control to ‘Standby’ position.

Machine will commence normal heat up

procedure.

Coffee does not run through

Machine is not turned on or plugged in Ensure the machine is plugged in and the POWER

button is pressed to ‘on’.

Water tank is empty

Refer to ‘Filling The Water Tank’, page 14.

Coffee grind is too ﬁne Ensure you use a suitable espresso grind. Refer to

‘The Grind’ on page 22.

Too much coffee in the ﬁlter

Refer to ‘Preparing The Coffee’, page 15.

Coffee tamped too ﬁrmly

Refer to ‘Tamping The Coffee’, page 15.

The ﬁlter is blocked Use the ﬁne pin on the cleaning tool to clear the

holes. Refer to ‘Cleaning The Filters’, page 24.

Coffee runs out too quickly

The coffee grind is too coarse Ensure you use a suitable espresso grind. Refer to

‘The Grind’ on page 22.

Not enough ground coffee in the ﬁlter

Refer to ‘Preparing The Coffee’, page 15.

Ground coffee not tamped ﬁrmly enough

Refer to ‘Preparing The Coffee’, page 15.

Coffee is too cold

Cups not preheated The cup warming plate starts to warm up as the

machine warms up. Refer to ‘Pre-Warming The Cups’,

page 14.

Milk not heated enough (if making a

cappuccino or latté)

When the base of the jug becomes too hot to

touch this is when the milk is heated at the correct

temperature. Refer to ‘How To Texture Milk For A

Cappuccino Or Latté’ page 19.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 75 76

No comments

Breville DIE CAST PROGRAMMABLE BES820XL User Manual Page 27