Breville DIE CAST PROGRAMMABLE BES820XL User Manual download pdf (Page 20)

• Hold the frothing jug at an angle so

that steam wand and/or the frothing

attachment sits just below the surface of

the heating milk and the steam will move

the milk around the inside of the jug in a

circular motion.

NOTE: The espresso machine features

a swivel steam wand assembly so

the position of the steam wand can

be changed to a comfortable angle.

HOW TO TEXTURE MILK FOR A CAPPUCCINO OR LATTÉ

• When the milk starts to increase in

volume, immerse the steam wand and/

or frothing attachment deeper into the

jug to heat the milk.

• Hold the jug at an angle with one hand

and place your other hand on the outer

base of the stainless frothing jug.

• When the base of the jug becomes too

hot to touch, set the Selector Control

to the ‘Standby’ position, stopping

the steaming function before

removing the jug. A pumping noise will

sound for a short time, do not be

alarmed as there will be a ﬁve second

delay prior to the machine carrying out

the Auto-purge function.

• Pour the steamed milk into each cup of

freshly brewed espresso coffee and

spoon in the frothing milk, in the

following ratios:

Cappuccino -

⁄3 espresso,

⁄3 steamed milk,

⁄3 frothed milk

Latté -

⁄3 espresso topped with steamed milk

and approximately ½ inch frothed milk, traditionally

served in a glass.

NOTE: After 5 minutes of continuous

steaming, the machine will

automatically disable the steam

function. The steam and hot water

lights will ﬂash. When this occurs

return the selector control to the

‘Standby’ position.

NOTE: Always ensure that the frothing

attachment has been ﬁrmly pushed

onto the steam wand and connects

with the rubber surround. For best

results use cold fresh milk (low

fat milk will froth easier). Always

clean the steam wand and frothing

attachment after every use. Refer

to ‘Care and Cleaning’, page 24.

NOTE: For brewing more coffee

immediately after using the steam

function, this machine features an

auto-purge function. This ensures

that ground coffee will not be burnt

by the initial water ﬂow from the

thermoblock being too hot. Instead

this water is automatically released

internally into the drip tray ensuring

that the internal thermostat is at

optimal temperature for extracting

coffee. Your coffee will always

be extracted at this optimal

temperature ensuring only the best

ﬂavored coffee is achieved.

WARNING: MILK SHOULD NOT BE ALLOWED TO RUN OVER THE TOP OF THE FROTHING

ATTACHMENT, OTHERWISE IT WILL NOT FUNCTION PROPERLY. TO AVOID

SPLATTERING OF HOT MILK, DO NOT LIFT THE END OF THE FROTHING ATTACHMENT

ABOVE THE SURFACE OF THE MILK WHILE FROTHING. ENSURE THE SELECTOR

CONTROL IS IN THE ‘STANDBY’ POSITION BEFORE REMOVING THE FROTHING JUG.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 75 76

Comments to this Manuals

No comments

Breville DIE CAST PROGRAMMABLE BES820XL User Manual Page 20

Comments to this Manuals

Related products and manuals for Coffee machines Breville DIE CAST PROGRAMMABLE BES820XL