Breville BBM400 User Manual download pdf (Page 16)

15

OPERATING YOUR BREVILLE PRODUCT

d) There are 2 trays for making 4 rolls

in total. Place both the trays on a ﬂat

surface. You will notice that one tray has

2 side handles, this tray is the top tray.

Underneath this tray you will notice 2

hooks. The handle of the second roll tray

hangs from off the hooks underneath

the tray.

e) To place the 2 baking trays into the

bread maker open the lid. Holding both

trays by the handle of the top tray so

that the bottom tray is hanging from the

top tray place the side handles onto the

hooks on either side of the bread maker.

f) Close the lid of the bread maker and

press START | CANCEL to continue

to the second prove and bake phase.

Do not over knead or baguettes may

become difﬁcult to shape.

USING THE CAKE PAN

a) Prepare the cake mixture as per the

recipes in this book.

b) Remove the bread pan from the bread

maker as per the previous instructions.

c) Align the D shaped hole on the paddle

with the D shape on the drive shaft

inside the cake pan. Push down ﬁrmly.

The paddle should rotate with the drive

shaft. It is important that the paddle is

properly assembled onto the drive shaft

to ensure ingredients are mixed and

kneaded properly.

d) Put the ingredients directly into the

cake pan, before inserting into the

bread maker. This will remove the risk

of ingredients falling onto the baking

elements.

e) Insert the cake pan in a horizontal

position, and rotate slightly clockwise

until it locks in place.

f) CLose the lid of the bread maker and

press START | CANCEL to commence

cooking.

g) Refer to cake recipes for detailed steps.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Comments to this Manuals

No comments