Breville BFP250 User Manual download pdf (Page 7)

Food stains and odours

Strong smelling foods such as garlic, onion, fish

and some vegetables such as carrots may leave

an odour or stain on the processing bowl, lid,

disc holder, spindle and food pusher. To remove

odours or stains, soak these parts in 2 litres

of water mixed with 100ml of lemon juice or

white vinegar for 30 minutes. Then wash with a

mild detergent and warm water, rinse and dry

thoroughly.

Storage

Store your food processor on the kitchen bench

or in an accessible cupboard. Insert the discs

and disc holder into the storage container.

Insert processing blade into the protective

storage cover then onto the drive shaft in the

bowl. Place the disc holder spindle into the

bowl, insert the storage container onto the

processing blade spindle and place the lid on

top. DO NOT store with the lid locked onto the

bowl as unnecessary strain will be placed on

the operating switch in the motor base. Insert

the food pusher and measuring cup into position

in the food chute.

13

Care, Cleaning and Storage

When you have finished processing ensure the

Speed Selection Dial is turned to the Off ‘O’

position, the appliance is switched off at the

power outlet and the power cord is unplugged,

then carefully remove the lid, processing blade,

or disc holder and spindle, then the processing

bowl.

Motor base

Wipe the motor base with a clean, damp cloth

after each use. NEVER IMMERSE THE MOTOR

BASE IN WATER OR OTHER LIQUID.

Processing bowl, lid, food pusher,

measuring cup, disc holder, spindle

and spatula

Wash in warm to hot water using a mild

detergent. Rinse and dry thoroughly.

DO NOT USE STEEL WOOL, SCOURING PADS

OR ABRASIVE KITCHEN CLEANERS AS THEY

WILL SCRATCH THESE PARTS.

Do not place any part of the food processor in

the dishwasher.

Processing blade and discs

Wash in warm to hot water using a mild

detergent. Food can be dislodged from the inner

shafts of the processing blade and disc holder

spindle by inserting the end of the spatula

handle or a bottle brush.

Ensure the fine end of the processing blade or

disc holder spindle and the hole in the bowl

lid bearing, located under the white button in

the centre of the lid, are clean and free of food

residue before attaching the lid for use or for

storage.

12

THE PROCESSING BLADE AND THE DISCS ARE EXTREMELY SHARP!!

USE CAUTION WHEN HANDLING AND STORING THESE PARTS.

Care, Cleaning and Storage continued



1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Comments to this Manuals

No comments