Breville BFP250 User Manual download pdf (Page 5)

Assembly and operation of your

Breville Wizz™ Multi Processor

continued

Using the stainless steel slicing/

shredding discs

Place the disc holder spindle onto the shaft

in the processing bowl.

Fit disc onto disc holder by placing the wider

lug on end of disc, into one side of the disc

holder opening (Fig 3). Lower the disc down

over shaft hole then push disc down to lock

into position (Fig 4). To remove disc, hold disc

holder with the disc facing away and place

thumbs underneath the end of disc marked

‘Push Up’ and push out (Fig 5).

Place the disc holder onto the disc holder

spindle.

Fig.3

Fig.4

Fig.5

WARNING: WHEN SLICING AND SHREDDING, ALWAYS USE THE FOOD PUSHER TO

GUIDE FOOD DOWN THE FOOD CHUTE. NEVER PUT YOUR FINGERS OR SPATULA INTO

THE FOOD CHUTE. ALWAYS WAIT FOR THE DISC TO STOP SPINNING BEFORE REMOVING

THE LID.

THE PROCESSING BLADE AND THE DISCS ARE EXTREMELY SHARP!! USE CAUTION

WHEN HANDLING AND STORING THESE PARTS.

Using the stainless steel processing

blade

Carefully remove the protective storage

cover from the processing blade.

Place the processing blade over the drive

shaft (see Fig 6). Rotate it slowly until

it settles into place. When handling the

processing blade, always hold by the spindle

(as shown in Fig 7).

Place the food to be processed into the

processing bowl as indicated in the recipe.

To avoid over-processing, check the

consistency frequently when the food being

processed requires a coarse or thick texture. If

necessary, turn the Speed Selection Dial to the

Off ‘O’ position, switch off at the power outlet,

unlock the lid and use the spatula to scrape

down the sides of the bowl to ensure even

processing.

Care

should be taken when removing the food

from the processing bowl by ensuring the

motor and the processing blade or disc, have

completely stopped before disassembling.

Ensure the Speed Selection Dial is turned to

the Off ‘O’ position, the appliance is switched

off at the power outlet and unplugged, before

removing the lid from the bowl. The processing

bowl should then be unlocked from the motor

body and the processing blade or disc holder

carefully removed before attempting to remove

the processed food.

Fig.6

Fig.7

Assembly and operation of your

Breville Wizz™ Multi Processor

continued



1 2 3 4 5 6 7 8 9 10 ... 17 18

Comments to this Manuals

No comments

Breville BFP250 User Manual Page 5

Comments to this Manuals