Breville BES900 User Manual download pdf (Page 6)

11

OPERATING YOUR BREVILLE DUAL BOILER™

OPERATING

your Breville Dual Boiler™

WARNING

Both the STEAM LEVER and HOT

WATER dial must be in the CLOSED

position for the machine to enter

START UP mode.

BEFORE FIRST USE

Machine Preparation

Remove and discard all labelling and

packaging materials attached to your

espresso machine. Ensure you have

removed all parts and accessories before

discarding the packaging.

Clean parts and accessories (water tank,

portaﬁlter, ﬁlter baskets, jug) using warm

water and a gentle dish washing liquid and

rinse well.

The water ﬁlter located inside the water tank

will need to be removed before washing the

water tank.

CONDITIONING THE WATER FILTER

• Remove ﬁlter from the plastic bag and

soak in a cup of water for 5 minutes.

• Rinse ﬁlter under cold running water.

• Wash the stainless steel mesh in

the plastic ﬁlter compartment with

cold water.

• Insert the ﬁlter into the ﬁlter holder

• Set Date Dial 2 months ahead

• To install ﬁlter, push down to lock

into place.

• Slide the water tank into position and

lock into place.

NOTE

To purchase ﬁlters contact Breville

Customer Service Centre

AUS 1300 139 798 NZ 0800 273 845

FIRST USE

Initial Start Up

• Fill tank with water

• Check Steam Lever and Hot Water dial

is in the CLOSED position.

• Press POWER On.

• A pumping sound will be heard

indicating empty boilers are being

ﬁlled with water for the ﬁrst time.

• Machine will reach operating temperature

and go into STANDBY mode.

Flushing The Machine

When the machine has reached STANDBY

mode, run the following 3 steps:

1. Press 2 Cup button to run water

through group head.

2. Run Hot Water for 30 seconds.

3. Activate Steam for 10 seconds.

Repeat this cycle until tank is empty.

TIP

You can maneuver your machine

about the bench using the drop down

swivel foot located under the drip tray.

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Comments to this Manuals

majid 09 May 2024 | 18:50:04

hi