5
using your kettle
If this kettle is lled above the maximum level mark, hot water may be ejected
from the spout during boiling. Beware of steam coming from the spout or lid
especially during relling. Never open the lid when the kettle is boiling.
1. With the kettle switched off, plug the power base into a suitable power outlet.
2. Remove the kettle from the power base before lling it with water. Do not ll the kettle
through the spout.
3. Open the lid and ll the kettle with water. Don’t overll the kettle and always
ensure that there is sufcient water in the kettle for it to operate correctly. This is
approximately 250ml or 1 teacup full. Always check the water level when the kettle is
positioned on its power base.
4. Close the lid and then switch the kettle on. Make sure that the lid is closed correctly
to ensure safe operation.
5. When the water reaches boiling point, the kettle will switch off automatically.
6. You may also switch the kettle off manually at any time by moving the switch to the
off position.
Always use caution when carrying your kettle when it is full of boiling water and when
pouring it.
Energy saving hints and tips
A Breville kettle, if used correctly, is a very energy efcient device. Why not try some of
these energy saving tips:
• Only boil the water you need. Overlling your kettle by one cup is the equivalent to
using an energy saving light bulb for one hour!
• It is not always necessary to re-boil your kettle. For example, one litre of water will
still be at 90°C after ve minutes - the perfect temperature for a cup of coffee.
Comments to this Manuals