Breville BDC550XL User Manual download pdf (Page 9)

16 17

USING THE YOUBREW

GLASS - SINGLE CUP MODEUSING THE YOUBREW

GLASS - CARAFE MODE

b) ‘BREWING’ as the coffee is dispensed

into the carafe.

To stop the cycle at any time, press the

START | CANCEL button. You will hear

a winding sound. This is normal.

CAUTION

Never open the swing-out door and

remove the coffee basket while brewing.

Hot water and coffee can cause injury.

6. Using the Brew Pause Feature

The Brew Pause feature temporarily

ceases the ﬂow of coffee when the carafe is

removed so a cup can be poured mid-brew.

Do not remove the carafe for longer than

20 seconds or the coffee may overﬂow the

coffee basket.

7. Empty the Coffee Basket

Once the brewing cycle is complete, the

ready signal will sound and a winding sound

will be heard. This is normal. The coffee

machine will automatically shut-off, however

the LCD screen will ﬂash ‘EMPTY COFFEE

FILTER’ as a reminder to remove the coffee

basket and discard the used grinds. Wash

the coffee basket, taking particular care to

rinse the chute area. Then dry the coffee

basket and chute area thoroughly.

We also recommend checking the coffee

grinds chute disc for any build-up of coffee

grinds. This is the stainless steel disc that is

visible when the swing-out door is opened.

A build-up of grinds on this disc can affect

the performance of the machine. Wipe the

disc clean then dry thoroughly.

CAUTION

The coffee basket and gold tone or

paper ﬁlter may still be very hot after

brewing. Use caution and allow to cool

before removing.

8. Warming Plate

The warming plate will automatically

turn on during the brewing process. It

will remain on for 2 hours after brewing

is complete then automatically turn off.

Alternatively, the warming plate can be

turned off before 2 hours by pressing the

START | CANCEL button. The LCD screen

will display 'WARMING PLATE ON' while

the warming plate is on. Use caution as the

warming plate will be hot.

CAUTION

Warming plate is hot.

CAUTION

Hot steam may rise when pouring.

The bottom of the carafe is hot to touch

for several minutes after brewing. Use

caution. Do not set the carafe on a heat

sensitive surface.

USING THE YOUBREW

GLASS

- SINGLE CUP MODE

First Time Use Only

We recommend ﬂushing the machine to

remove any dust particles or residues from

the manufacturing process. Follow the

instructions, ‘Using the YouBrew

Glass -

Carafe Mode’, ensuring to completely ﬁll the

water tank (Step 1) and select the

‘PRE-GROUND’ coffee setting (Step 4).

However do not add any coffee to the

coffee basket. Once the cycle is complete,

discard the water from the carafe and repeat

the cycle again for best results. The machine

is now ready to use.

CAUTION

We recommend using cold, ﬁltered

water. We do not recommend the use of

de-mineralized or distilled water as this

may affect the taste of brewed coffee

and how the coffee machine is designed

to function.

1. Fill the Water Tank

Press to open the ﬂip top-lid. Pour the

desired amount of cold, preferably ﬁltered

water into the tank using a jug or the

provided carafe. The LCD screen will

indicate the amount of water in the tank as

it is ﬁlled. The machine will beep when full

and the water level ﬂoat will rise to indicate

the maximum level. Do not exceed the 12

cup maximum. Doing so may cause water

spillage at the back of the machine. Close

the ﬂip-top lid.

NOTE

Check the water level on the LCD

screen before use. The water tank

should be reﬁlled with cold, preferably

ﬁltered water. Do not ﬁll with any

other liquid.

NOTE

Never pour water into the bean

hopper or grinding chamber area.

Doing so can cause the grinder to

clog. Only re-commence use when

the grinding chamber and grinding

burrs are completely dry. Refer to

Troubleshooting, ‘Moisture clogging

grinder’, page 29.

NOTE

Never ﬁll the water tank once the

coffee machine has started a brewing

cycle. This will affect the volume

dispensed into the cup.

2. Pre-Warm the Cup or Travel Mug

A warm cup will help maintain the coffee’s

optimal temperature and keep coffee hotter

for longer. Fill the cup with hot water for about

30 seconds then discard the water. Place

the cup into position under the drip stop

outlet, either on the drip tray or in the drip

tray cavity (see tip below). Ensure no parts of

the cup come into contact with the warming

plate. The warming plate will be hot during

brewing and for approximately 5 minutes

after brewing and can damage non-heat

resistant cups and travel mugs that are in

direct contact.

WARMING PLATE

CAN DAMAGE

NON-HEAT

RESISTANT CUPS.

DRIP TRAY

CAVITY

TIP

For taller cups and travel mugs,

remove the drip tray at the base of

the machine. Press the OPEN button

to open the swing-out door. Insert

the cup/mug into the drip tray cavity

before closing the swing-out door. The

maximum cup/mug dimensions are

7.5" height, 2¾" diameter.

REMOVE DRIP TRAY, OPEN DOOR,

INSERT CUP, CLOSE DOOR.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Comments to this Manuals

No comments

Breville BDC550XL User Manual Page 9

Comments to this Manuals

Related products and manuals for Coffee makers Breville BDC550XL