10 11
OPERATING YOUR BREVILLE PRODUCT
GRINDER OVERVIEW
Your Dose Control™ Pro uses hardened
stainless steel Conical Burrs and can grind
whole bean coffee suitable for a range of
brewing methods, from the finest setting
for Espresso to the coarsest setting for
Plunger.
The grind amount (dose) for all coffee types is
controlled by an electronic timer. The dose for
each brew method can be adjusted by rotating
the GRIND TIME dial and changing the time
the grinder will run. You can grind directly
into a Portafilter, Container or Drip Coffee
filter basket.
Within each brew method, Espresso, Percolator,
Drip or Plunger, there is a range of grind
size settings; the grind settings will differ
between each brew method. This is because
each method requires different grind sizes for
optimum extraction. Experiment with different
grind size settings until you achieve the brew
that best suits your taste.
Rotating the Bean Hopper will turn the Grind
Size Collar to adjust grind size.
BEFORE FIRST USE
Remove and safely discard all promotional
labels and packing materials attached to your
Breville product. Wash hopper, and cradles in
warm soapy water and dry thoroughly. Wipe
exterior of grinder with a soft damp cloth and
dry thoroughly. Place grinder on flat level
surface and plug power cord into 220-240V
outlet and switch Power 'ON'.
ASSEMBLING YOUR BREVILLE
CONTROL DOSE™ PRO
Bean Hopper
Align tabs on the base of the bean hopper
and insert hopper into position. Holding the
hopper, press down firmly and turn the bean
hopper dial 45° to lock into position.
A "click" sound will be heard when the hopper
is properly locked in place.
X
Ensure the hopper and the Grind Size
Collar is aligned properly.
Fill with fresh coffee beans and secure lid on
top of bean hopper.
NOTE
If the bean hopper has not been locked
into position, the GRIND TIME dial will
not be illuminated. This is to disable
grinder operation for safety reasons.
The bean hopper can be removed by
holding the hopper and turning the Dial
anti-clockwise and lifting hopper to remove.
The locking system allows you to remove
and transfer beans in the hopper to a storage
container safely.
GRINDING FOR ESPRESSO COFFEE
Use single wall filter baskets when grinding
fresh coffee beans. Use the finer 1–25 settings
in the ESPRESSO range.
ESPRESSO
FINE
0 5 10 15 20
Step 1:
Insert the appropriate portafilter cradle size.
Insert your portafilter into the cradle.
50-54mm
58mm
CRADLES
PUSH
Step 2:
Selecting Grind Amount
Select the desired amount of ground coffee
required by turning the GRIND TIME dial.
As a guide, start with 5 secs for a single shot
filter basket or 9 secs for a double shot filter
basket. This will vary depending on the
individual size of your filter basket. Refer to
the Coffee Chart on page 14 as a guide. Rotate
the GRIND TIME dial to adjust the grind time
until the correct dose is achieved. Increasing
the time will increase the dose and decreasing
the time will decrease the dose.
Step 3:
Tamping the Ground Coffee
After dosing the portafilter with freshly ground
coffee, tamp down with between 15-20kg of
pressure. The amount of pressure is not as
important as consistent pressure every time.
OPERATING YOUR BREVILLE PRODUCT
(26 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals